b-mola BM10, Руководство по эксплуатации

Страница: 12 / 16

1. Remove all packaging materials, use a soft dry
cloth to clean all the parts then re-assemble
parts back together.
2. Placing the unit on a dry, solid, level surface,
and ensure the unit is provided with reasonable
space of at least 15 cm from any objects, in
order to operate effectively.
3. Check power sockets and any extension cords
to confirm compliance with unit requirements.
Ensure that the unit is plugged in before usage.
4. The unit is installed a sensor, if filters have not
been properly installed, the unit wouldn't
operate.
5. When the unit is turned on for the first time,
warm air and mineral smell may be released
from the air outlet. This is normal as catalytic
oxidation is taking place inside the NCCO Reactor,
and completely harmless to human body.
Getting Started
Installation Procedures:
Take out HEPA Filter and NCCO Reactor from
protective packaging material.
First, put HEPA Filter into NCCO Reactor
Frame. Then, install the filter set into unit
body.
Close the Air Inlet Cover, connect the unit with
power supply then press the ON / OFF Button to
turn on unit.
Slightly push the concave upward to open Air
Inlet Cover.
Illustrationg Diagram:
Basic Information
Main Parts & Components First-time Operation
Air Inlet Cover
HEPA Filter
NCCO Reactor
Unit Body
ON / OFF Button
Air Outlet
Power Adapter USB Type-C
Power Cord
Ribbon (Optional) Silicon Rubber Case
(Optional)
It is prohibited to clean, soak or wet any
parts, or they could be damaged and so
affect the unit operation.
06 07