B meters HYDROCLIMA 2, Руководство пользователя

Страница: 8 / 13

6
HYDROCLIMA 2 - User Manual
In case of recording of the following events, additional results are displayed, whether or not the display has been
initiated to present the data:
Additionally, the following special data presentation cycles are possible:
Item Conditionally Message Time in s Error
1 YES “Err”
6
Collective information on a group of errors / events
2 YES “Open” Enclosure opening (event)
3 YES
“ ”
Operation time exceeded - battery is empty
4 14 Switched off display
Total 20
Item Conditionally Message Time in s Error
1 “- - - - -” 2 Factory’s settings (no configuration)
2 6 Switched off display
Total 8
Item Conditionally Message Time in s Error
1 “SLEEP” 2 Stand-by mode
2 6 Switched off display
Total 8
Item Conditionally Message Time in s Error
1 “CLOSE” 10 Seal application
Total 10
Item Conditionally Message Errorv
1 YES “Err” Collective information on a group of errors / incidents
2 YES “Open” Enclosure opening (incident)
3 YES “EXT” Information on connected external sensor
4 YES
“ ”
Operation time exceeded - battery is empty
→ A heat cost allocator with data presentation switched off (data presentation in a loop, with messages displayed
one by one)
→ Factory’s settings (no configuration)
→ Stand-by mode - information displayed between the configuration to the start of the accounting
→ Seal application
→ The heat cost allocator initiated to display in a basic mode or in an extended mode (continuous presentation all the
time of the basic mode):