background image

1.

Fill Filler Pail with water from raw water

source. After filling Filter pail, cover

it with the Filter Pail lid.

2.

Wait a few minutes for water to

flow through the filters 
and into the Clean 

Water Pail.

NOTE: On 

first use, discard the 
first two pails of water 
produced by the 
system. This flushes 

the Filters.

3.

Pull spigot

handle forward
to dispense purified water.

FILTER CAPACITIES AND 

REPLACEMENT

Nano Filter: 6 months or is 
slow flow requires a change 

(Part# WP-2003)*a

Carbon Filter Cartridge: 
6 months or 500 gallons, 
whichever is first. 

 

(Part# WP-2002)

Pre-Filter Gasket: replace when filters are re

-

placed (#180125-4160)

Pre-Filter Net (optional): replace when damaged 
or worn (Part# WP-2040)

Sleeve for Fibrous Nano Filter: replace when 

 

accumulated dirt cannot be cleaned or removed 
or when sleeve restricts flow. (Part# WP-2050)

*Patent Pending

1.

Place the Filter Connector

 

on a hard surface with the

 

threaded end up.

2.

Place the threaded portion

 

of the connecting Adaptor

 

up, 

through the hole in the

 

Clean 

Water Pail Lid, and then

 

through the hole in the bottom

 

of the Filter Pail. (as illustrated)

3.

Press down on the bottom

 

of the Filter Pail (near the hole)

 

to expose the threads of the

 

Connecting Adaptor. Fill the

 

Gasket over th threads as far

 

as possible.

4.

Screw Pleaded Fibrous

 

Nano Filter onto Filter Con

-

nector (turning clockwise).

 

Tighten carefully, but be care

-

ful not to over-tighten. (Snug

 

but not so tight as to distort

 

the shape of the lid.)

5.

Attach Spigot Assembly

 to 

clean water pail as shown in

 

diagram. 

6.

Remove the orange plug from the outlet end

 

of the Carbon Filter. Place gasket over threads.

 

Screw the Carbon Filter into the lower portion of

 

the Connecting Adaptor (turning clockwise) and

 

hand tighten.

7.

Place Filter Pail with attached filters onto the

 

Clean Water Pail. Your system is now ready for

 

use. 

A S S E M B LY

WP-2000

   

Pour-Through Water Purification and Filtration System 

 2

IMPORTANT NOTE: If Optional Pre-Filter Net and/
or Filtrations Sleeve are included, put them in place 
before adding water by sliding the Filtration Sleeve 

over the Purification Cartridge and then stretching 

the Pre-Filter Net across the top of the Filter Pail.

Spigot Assembly

O P E R AT I O N

Clean Water Pail Wall

Gaskets

Nut

FLO

W

FLOW

FLOW

FLOW

Отзывы: