B-band A1, Инструкция по установке и руководство пользователя

Страница: 5 / 28

4 5
The A1N is a single input endpin preamp designed for use only with
the 1470 AST transducer. This modified A1 endpin preamp has an
intergraded frequency notch of 6 db at 180 Hz.
The A2 is a two input / two output endpin preamp. Designed as a
platform for two sources, the best performance is with the combination
of UST and AST. The second input can also be configured for use with
the B-Band AG-MIC condenser microphone or a passive magnetic
pickup with the mini dipswitches inside the A2. With the A2 you will
need a stereo Y-cable in order to control the mix between the two
outputs at a mixer or amplifier. With a standard guitar cable the output
will be that of channel 1only (normally the UST).
The A2.2 is a two input / single output endpin preamp. Designed
specifically for use with UST and AST only. The exclusive single chan-
nel mono output has a special crossover blend of the UST and AST.
The crossover blend is a signal of the UST and AST crossed over at
700Hz. Sound above 700 Hz is the AST and sound below 700Hz is
the UST. The AST reproduces the high-mid to high tones while the
UST reproduces the low-mid to bass tones. Inside the A2.2 preamp
there is a mini input gain trim control for the UST.
The A3.2 is a side mount preamp with a 4-band “graphic” equalizer.
This single input preamp will accept either a UST or AST.
The A4.2 is a dual input / single output, side mount preamp with a
3-band “graphic” equalizer and mix control. This preamp is designed
especially for use only with a UST / AST combination. There are
separate input gain trim pots, at the faceplate, for the adjusting of the
input levels of the UST and AST. The A4.2 has a new exclusive mix
control that, at the AST side of the mix, actually gives the combined
sound of the UST and AST crossed over at 700 Hz. When the mix
is set at the AST side sound above 700 Hz is the AST and sound
below 700Hz is the UST. At the UST side of the mix, only the sound
of the UST is heard.
The A5 is a single input design for use with either UST or AST. The
A5 controls include sliders for the volume and a 4-band graphic
equalizer (bass, midrange, treble and presence), two rotary controls
for adjustment of a notch frequency and a notch depth for feedback
suppression and a phase control push button.
The A6 preamp is a dual input / single output preamp specifically
designed for use with only a UST / AST combination. The A6 has slider
controls for volume, a 3-band graphic equalizer (bass, midrange and
treble), and UST / AST mix. It also has two input gain controls for the
UST and AST that are adjusted with a small screwdriver, two rotary
controls for adjustment of a notch frequency and a notch depth for
feedback suppression and a phase control push button. The output
is a mono mix of the UST / AST.
The A1, A1N, A2.2, A3.2, A4.2, A5 and A6 use a standard 1/4”
plug to turn on the 9-volt power. The A2 uses a custom endpin
jack that allows either standard 1/4” mono or stereo plug to turn
on the 9-volt power.
DO NOT USE B-BAND A-SERIES PREAMPS
WITH PHANTOM POWER!
1.4. OPTIONAL CONDENSER MICROPHONE
FOR A2 PREAMP
The B-Band AG-MIC microphone option is an excellent choice and
value for an additional condenser microphone. The mic capsule is
especially designed for acoustic instruments, with suitable bass
roll-off and treble boost.
2. PACKAGE CONTENTS CHECKLIST
2.1. UST package contents:
• 1 pcs UST transducer
2.2. AST package contents:
• 1 pcs AST transducer
• 1 pcs cardboard installation guide (only 1470)
2.3. A1 preamp package contents:
• 1 pcs A1 preamp with strap attachment
• Strap attachment includes:
- Small hex nut
- Small dress washer
- Lock washer