Bischoff & Bischoff GmbH | 01.06.2019
EN
29
28
Tobago / SL
| shower chair
shower chair |
Tobago / SL
4.3. Seat
For initial installation the seat of the shower chair must be unfolded
according to the instructions in section 4.4. The seat can then be
pushed back onto the frame (fig. 06). Ensure that the recesses in the
seat are located directly above the frame.
4.4. Folding/unfolding
Unfolding
•
Tilt the two side frames forwards. Fold the seat frame onto the
support surface of the side frame from top to bottom.
•
Secure the seat and side frames by inserting the two lock pins into
the holes provided (fig. 07).
•
For correct seating, both grip bars and the recesses of the seat must
be oriented towards the front!
Folding
•
For folding the pressure pins under the seat the pressure pins must
first be loosened. To do so, press the pressure pin with your thumb
and pull the pin out at the same time (fig. 08).
•
Repeat the process on the other side and use your free hand to
prevent the seat from folding down.
•
The seat can then be folded down, and the seat frame can be
folded back (fig. 09).
06
07
08
4. Assembly and adjustments
Your new B+B shower chair is pre-assembled in a B+B original box.
Attached parts are supplied separately to prevent damage during
transport.
You can carry out the adjustments of your shower chair yourself with
a little manual dexterity. If you have any queries, please contact your
medical supply dealer.
4.1. Installing the feet and adjusting
the seat height
•
Insert the foot parts into the respective frame tubes and secure
them with the locking pin (fig. 02).
•
Ensure that the safety bracket of the pin is closed (fig. 03).
•
The rear feet of the Tobago SL are connected with a strut and are
spread wider (fig. 04). The installation is the same as Tobago.
•
You can adjust the seat height of the Tobago using the
corresponding holes.
•
Ensure that all feet are adjusted to the same height so the chair is
stable.
4.2. Backrest
The backrest is placed on top of the corresponding side frame element
and secured with the mounting buttons in the holes provided for
them in the frame and backrest (fig. 05).
02
03
04
05
09
Please make sure to keep your fingers on the seat
cover while unfolding the seat. Otherwise there is a
risk of entrapment!
