B+B SmartWorx ESWGP206-2SFP-T, Руководство пользователя

Страница: 8 / 19

8
PRODUCT DESCRIPTION
The ESWGP206-2SFP-T is a plug-and-play, POE+, unmanaged, industrial Ethernet Switches with IP30 protection. It
provides four 10/100/1000Mbps copper ports and two SFP ports for 1000Mbps speed. The fiber SFP port (Port #6)
can accommodate both Single-mode and Multi-mode fiber. The SFP port (Port #5) supports 10/100/1000 or
1000Mbps copper SFPs and gigabit fiber SFPs, for both Single-mode and Multi-mode fiber. This switch supports
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100BaseTX and 100BaseFX. It is both DIN rail mountable and panel
mountable.
The ESWGP206‐2SFP‐T supports IEEE802.3x for flow control, full and half duplex, and provides Auto Cross for the
copper ports. Each 10/100/1000Mbps port supports auto negotiation and is 802.af/at compliant for POE/ POE+.
As a POE product, it supports detect legacy/pre-standard PD devices. It also provides PD real-time protection
through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit. It
supports up to 9720 byte jumbo frames
The ESWGP206‐2SFP‐T accepts 24-52VDC input voltage with dual power input using terminal blocks. The operating
temperature range is -40˚C to 85˚C (Wide Temperature Type) with an ambient relative humidity rating of 5 to 95%
(Non- condensing).
FEATURES
• 10/100/1000Base-T Auto-Negotiation
•
IEEE802.3af and IEEE802.3at, including two-event classification
• Supports legacy PD devices
• Unmanaged, Plug and Play
• Full and Half Duplex
• Auto Cross feature for the RJ-45 copper port
• Four 10/100/1000 copper POE+ ports
• Two SFP ports
• Each POE+ port supports a maximum of 30W power for a PD device
• PoE+ Reset function: included HW reset PoE and auto detect SFP uplink port status to detect
shut down PoE function or not, set by DIP switch
• IP30 metal enclosure
• Din-rail mount, panel mount
• Redundant dual VDC power inputs, 24 – 52 VDC
• Max Power Consumption 130W
• UL standard for safety of industrial control equipment (IEC/UL/EN)
• Shock, vibration, and freefall
• MAC address capability: 4K
• Broadcast Storm Protection: disabled
• Operation Temperature:-40˚C to 85˚C