AZZA U694 Series, Руководство пользователя

Страница: 15 / 49

The
AZZA
U694 MAINBOARD SERIES
Page 14
NOTE: “Out Of Memory” Error Message
If you have installed more than 512 MB of RAM and are running Microsoft Windows Millennium Edition,
Windows 98 Second Edition, Windows 98 or Windows 95 you may experience memory problems. Two
symptoms of these problems are being unable to run an MS-DOS session while you are running Windows or
the computer may stop responding while Windows is starting.
There are three possible solutions to this problem:
1) Reduce the amount of memory Vcache uses to 512 MB or less by altering the MaxFileCache setting in
the System.ini file.
2) Use the System Configuration Utility to reduce the amount of memory Windows uses to 512 MB or
less.
3) Reduce the memory installed on your computer to 512 MB or less.
This problem can also occur if you are using an Advanced Graphic Port (AGP) video adapter.
2.4.3. PCI Slots
These boards come with five PCI slots. They are located on the left hand side of the
board. Both PCI and PCI expansion cards may require IRQ’s. This mainboard complies
with Plug and Play (PnP) specifications. Whenever a PnP compliant card is added the sys-
tem will automatically be configured and the IRQ’s will be assigned automatically.
When you are inserting your PCI card make sure that the pins are correctly aligned. When
the pins are properly aligned with the hole’s in the slot, push down gently.
11 pins 49 pins
2.4.4. AGP (Accelerated Graphics Port) Slot
AGP is a dedicated bus slot. It operates at 66 MHz and transfers data at a rate up to 106
MB/s. This allows 3D applications to run more smoothly. The U694 mainboards each come
with one AGP slot. These slots are able to support 1x, 2x and 4x AGP cards.
66 pins
Hardware Installation
Top View of PCI Slot
Top View of an AGP Slot