The
AZZA
U601 Mainboard Series
Page 24
If you have made an improper setting in the BIOS setup and your computer is
not functioning, or if you have forgotten your password, you can use this
jumper, JP 1, to clear the CMOS memory and to reconfigure your system.
To clear the CMOS, please follow these instructions:
1.
Turn the system power “OFF” and unplug your computer.
2.
Insert the jumper cap on Pin 2 and Pin 3 for 3 ~ 5 seconds.
3.
Pull out the jumper cap and replace it on Pin 1 and Pin 2.
4.
Turn your PC on and run the BIOS setup program.
JP1: Clear CMOS
PIN: 1 2 3
Hardware Installation
