AZZA PT-5IVL, Руководство по эксплуатации

Страница: 11 / 25

PT-5IVL
SYSTEM BOARD
HARDWARE SETUP
(J) CN9 Floppy Disk Control Port connector (Using IRQ6, DMA channel 2)
(K) CN10 Pipeline-burst SRAM (COAST) module slot
(L) CN11 IDE 2 connector (Secondary IDE Port, using MIRQ0)
(M) CN12 IDE 1 connector (Primary IDE Port, using IRQ14)
(N) RS Reset Button connector
Pin #
Assignment Pin1&2 Function
1 Ground Open No action
2 Reset Control Short System Reset
(O) HL IDE HDD LED connector
Pin #
Assignment
1 Pullup (+5V DC)
2 Signal Pin
(P) TL Turbo LED connector
Pin #
Assignment
1 Pullup (+5V DC)
2 Signal Pin
(Q) SS External SMI button connector
Pin #
Assignment Pin1&2 Function
1 SMI Control Open For normal operation
2 Ground Short To get into Suspend mode
(R) TS Turbo Switch connector (This function is reserved)
Pin #
Assignment Pin1&2 Function
1 Turbo Control Open Turbo
2 Ground Short Normal
(S) SPEAKER Speaker connector
Pin #
Assignment Pin # Assignmen
1 +5V DC 4 Speaker Data Signal
2 No Connection 5 No Connection
3 No Connection
(T) KEY LOCK Front Panal Power LED & Key-Lock connector
Pin #
Assignment
1 Pullup (+5V DC for Power LED)
2 No Connection
3 Ground
4 Keyboard Lock
5 Ground
4-4