36
BIOS SETUP
BIOS SETUP
BIOS
Set
u
p
UART 2 Mode
This item allows you to select which mode for the Onboard Serial Port 2.
IR Function Duplex
This item allows you to select the IR half/full duplex function.
TX, RX inverting enable
This item allows you to enable the TX, RX inverting which depends on different H/W
requirement. This field is not recommended to change its default setting for avoiding
any error in your system
.
Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O address setting
.
Onboard Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select Normal, Com-
patible, or SPP unless you are certain your hardware and software both support one of
the other available modes.
ECP Mode Use DMA
This item allows you to select a DMA channel for the parallel port for use during ECP
mode.
EPP Mode Select
This field allows you to select EPP port type between 1.7 or 1.9.
Onboard Legacy Audio
This field controls the onboard legacy audio
.
Sound Blaster
SB I/O Base Address
SB IRQ Select
SB DMA Select
MPU-401
MPU-401 I/O Address
Game Port (200-207H)
