VIA 693A ATX
MAINBOARD
HARDWARE SETUP
3-3
( Double-Side DIMM Module )
2.
Minimum one DIMM module must be installed on the mainboard.
3.
You can use single side or double side DIMM module on this mainboard.
4.
Always install DIMM module starting from DIMM 1 socket first, and then
DIMM 2 and DIMM 3.
5.
If you are installing the CPU with 133MHZ front side bus speed, PC-133 DIMM
module is recommended..
6.
Maximum memory size for this mainboard: 384MB
The VIA693A chipset supports the ECC feature and it can be used to check the
memory sub-system and make sure there is no error during memory read and
memory write. Before you can enable the ECC feature in the BIOS setup program,
please check the memory module and make sure there is the parity bit.
3.3
CONNECTORS
The connectors on the mainboard are either the pin header type or D-type
connectors, they are used to connect the accessories or peripheral devices (such as
power, mouse, printer,...etc.). Followings are the connectors with its description
and the pin assignment which is designed on the mainboard.
(A) BAT1: Battery Socket
(Use the 3 Volts Lithium battery : CR2032)
DIMM3
BIOS
DIMM2
DIMM1
+
BAT1: Battery Socket
Pin#
Pin name
Pin#
Pin name
+
Battery Positive
-
Ground
