VIA 693A ATX
MAINBOARD
AWARD BIOS SETUP
4-16
4.9
INTEGRATED PERIPHERALS
ROM PCI / ISA BIOS (2A6LGXXX)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
OnChip IDE Channel0
:
Enabled
UART Mode Select
: Normal
OnChip IDE Channel1
: Enabled
IDE Prefetch Mode
: Enabled
Onboard Parallel Port
: 378/IRQ7
Primary Master PIO
: Auto
Parallel Port Mode
: SPP
Primary Slave PIO
: Auto
Secondary Master
PIO
: Auto
Secondary Slave PIO
: Auto
Primary Master UDMA
: Auto
Primary Slave
UDMA : Auto
Secondary Master
UDMA : Auto
Secondary Slave UDMA
: Auto
Init Display First
: PCI Slot
POWER ON Function
: Button Only
KBC input Clock
: 8MHz
ESC : Quit
↑↓→←
:
Select Item
Onboard FDC Controller
: Enabled
F1 : Help
PU/PD/+/- : Modify
Onboard serial Port 1
: 3F8/IRQ4
F5 : Old Values
(Shift)F2 : Color
Onboard serial Port 2
: 2F8/IRQ3
F7 : Load Setup Defaults
OnChip IDE Channel0/1:
( Default setting : Disabled )
The chipset contains a PCI IDE interface with support for two IDE channels. Select
“
Enabled”
to activate the first and/or second IDE interface. Select
Disabled
to
deactivate an interface, if you install a primary and/or secondary add-in IDE
interface.
IDE Primary/Secondary Master/Slave PIO:
( Default setting : Auto )
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4)
for each of the four IDE devices that the onboard IDE interface supports. Modes 0
through 4 provide successively increased performance. In Auto mode, the system
automatically determines the best mode for each device
IDE Primary/Secondary Master/Slave UDMA:
( Default setting : Auto )
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it
and the operating environment includes a DMA driver (Windows 95 OSR2 or a
third-party IDE bus master driver). If your hard drive and your system software both
support Ultra DMA/33, select Auto to enable BIOS support.
