AZZA 361 Скачать руководство пользователя страница 8

Страница: 8 / 46

361 Mainboard Series

Page

Page 7

Onboard Audio Features

Supports Microsoft DirectSound/ DirectSound 3D

Word Size

•

Data Path: 8-bit, 16-bit, 32-bit, 64-bit

•

Address Path: 32-bit

Front Side Bus Frequency (FSB)

For a 200 MHz CPU the mainboard supports a 100 MHz FSB. For a 266 MHz CPU the mainboard

supports a 133 MHz FSB

BIOS

•

Award BIOS, Windows 95/98 Plug and Play (PnP) compatible.

•

Supports SCSI sequential boot-up.

•

Flash EPROM for easy BIOS upgrades.

•

Supports DMI 2.0 function

Desktop Management Interface (DMI)

The mainboard comes with DMI 2.0 built into the BIOS. The DMI utility in the BIOS will auto-

matically record different information about your system configuration and store this informa-

tion in the DMI pool, which is a part of the system board's Plug and Play BIOS. DMI, along with

the appropriately networked software, is designed for easy inventory, maintenance and the

simplified troubleshooting of computer systems.

WOL (Wake

LAN) Po

One WOL connector supports Wake-On-LAN functionality.

USB

Ports

The mainboard is equipped with 4 USB ports. USB allows data exchange between your

computer and a wide range of simultaneously accessible external Plug and Play peripherals.

USB 1 and USB 2 are external ports. They can be found on the PC 99 ATX connector. USB 3

and USB 4 are internal connectors that can be used to connect other USB devices. (Optional

cable for two connectors is sold separately).

Connectors

•

One connector for IrDA interface.

•

Two IDE connectors.

•

One floppy drive interface supports up to two 2.88MB floppy drives.

•

One 20-pin ATX power supply connector.

•

CPU and chassis fan connectors.

•

Two CD audio-in connectors.

•

One internal DB-9 serial port connector:

COM 2

(UART)

Introduction

Introduction

VIA_361_Manual_030701_Re...
page 7

Wednesday, July 11, 2001 13:37

Composite

Содержание 361















































Результаты поиска

Содержание 361

Отзывы:

Бренды по названию

Популярные бренды

AZZA 361, Руководство пользователя

Результаты поиска

Содержание 361

Отзывы:

Бренды по названию

Популярные бренды