AzureWave AW-GA220, Руководство пользователя

Страница: 46 / 50

Common Problem
There is a message that says this device has been owned by “xxxx”
and I cannot connect to it.
On the advanced setting page of wireless audio utility, current user can
lock the utility and reject the other users connecting to this device.
Hence, you cannot connect to AW-GA220.
What is my device's default IP Address?
The device's default IP address is 192.168.0.10.
What should I do if I forget all the default settings?
You may reset to the default settings of AW-GA220 by pressing and
holding the reset button on the rear panel for 10 seconds then go to
Setup Wizard to configure again.
My Device has a wired connection to my network. Why can't I see the
Device on my Device Utility?
Restart the PC and tr y again. Check all the cable connections and
power.
My device is wirelessly connected to my network, why can't I see the
Device on my Device Utility?
Restart the PC and tr y again. If it happens again, please return to the
Setup Wizard again and make sure you configure the Device properly or
move your Device closer to your wireless access point and tr y again.
Music Adapter
What kind of music format I can play with AW-GA220?
You can use anything that plays on your PC.
I cannot hear the music
Please check Audio LED(Blue), make sure the blue LED is turned on and
flashing.
If blue LED is turned off, please check your wireless connection, and
open the AzureWave Wireless Audio Utility to connect to the AW-GA220.
Please check your wireless audio utility, it will display device status, make
sure you are the person connect to the device.
If blue LED is turn on but not flashing, it means wireless audio connection
is successful but NO audio stream is running. Please restart your PC audio
player and play the audio.
10. Troubleshooting
User Manual
46