AzureWave AW-CU427-P, Руководство по началу работы

Страница: 9 / 16

9
The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or
disclosed in whole or in part without prior written permission of AzureWave.
K6 P0_2 UART RXD VDD_33 I
J7 P0_3 UART TXD VDD_33 O
J6 P0_5 EN pin VDD_33 I
M2 P1_0 INT pin VDD_33 O
M3 P1_1 MSG pin VDD_33 I
R5 P11_2 QSPI_CS VDDD I/O
N6 P11_3 QSPI_IO3 VDDD I/O
M4 P11_4 QSPI_IO2 VDDD I/O
P4 P11_5 QSPI_IO1 VDDD I/O
P5 P11_6 QSPI_IO0 VDDD I/O
M5 P11_7 QSPI_SCK VDDD I/O
M1 VBACKUP
VBACKUP is the supply to the backup domain. The
backup domain includes the 32-kHz WCO, RTC, and
backup registers. It can generate a wake-up interrupt to
the chip via the RTC timers or an external input. It can
also generate an output to wakeup external circuitry. It
is connected to VDDD when not used as a separate
battery backup domain. VBACKUP provides the supply
for Port 0. Min. is 1.4 V in Backup Mode
PWR
K1 VDD_NS Power Supply for PSoC 62 Buck regulator VDDD PWR
H2 VDD_USB Power Supply for PSoC 62 USB 3.3V PWR
R8 VDDA Power Supply for PSoC 62 P9,P10 (analog peripherals) 1.7~3.6V PWR
R3 VDDD
Power Supply for PSoC 62
P1,P5,P6,P7,P8,P11,P12,XRES
1.7~3.6V PWR
H1 VDDIO_WL
Power Supply for CYW43438 Digital I/O. Connect it to
VDDIOR.
VDDIOR PWR
J1 VDDIOR
Power Supply for PSoC 62 P2, P3, P4. Connect it to
VDDIO_WL
1.8V PWR
F1 WLAN_VBAT Main Power Supply for CYW43438 3.2~4.8V PWR
E1 WLAN_VBAT Main Power Supply for CYW43438 3.2~4.8V PWR
J2 XRES_L
External reset I/O pin(pulled up by a 4.7K ohms resistor
internally)
VDDD I