4
The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or
disclosed in whole or in part without prior written permission of AzureWave.
1 Overview
1.1 Device supported
This document supports AW-CB511NF and AW-CB511NF-BPF.
2. System Setup
2.1. Hardware Requirements
M.2 2230 Standard key E receptacle.
Host system need running the Linux operating system.
Vector Signal Analyzer/WLAN analyzer for transmit measurements.
WLAN signal generator for receiver measurements.
RF isolation chamber for receive measurements.
RF attenuators
RF cable
2.2. Software Requirements
Linux device driver package
(AW-CB511NF and AW-CB511NF-BPF DUT driver must be installed in the host system to run WL
commands.)
