Install SafetyCam in Vehicle
A
2
Plugin the SafetyCam™ with a USB cable
B
Mount the SafetyCam™ to the windshield.
Our dashcam comes with 3M adhesive for the mounting
bracket. Place it on the windshield where it does not obstruct
the driver’s vision and will be able to view both the road and
the driver.
Note: Please make sure the mounting location is clean and free of dust. A
popular area to mount the dashcam is below the rearview mirror so it does not
obstruct the view.
C
Plug the USB cable to the cigarette lighter outlet of your vehicle.
Determine where to route the cable. In many cases, it can be
tucked under the headliner gently using the included orange
tool. Alternatively, the included adhesive cable holders can be
used to route the power cord along the top of the windshield,
out of the driver’s view. The cable can be routed along the
weatherstrip on the A-pillar of the vehicle and down. The cable
can be either routed under the dash at this point or it can be
run under the driver
fl
oor mat and plugged into a cigarette
lighter adapter.
Once all of the equipment is installed, start the vehicle. The
dashcam will now display 3 LED’s that will signify that the
connection is Established.
(888) 777-9718 | [email protected] | www.azuga.com
© 2019 Azuga, Inc. All rights reserved.
2
2.1 Cigarette outlet Installation