Prepare for Installation
1
A
Check Compatability of your OBD device
(Skip this step if you got OBD in the box)
The SafetyCam works in conjunction with a Plug-and-Play OBD
GPS Tracker in the vehicle.
Please note that it only works with a 4G-LTE OBD device that
began shipping from Azuga in July 2019. If you have an older
device that runs on the older 3G network, it would have to be
replaced with a newer device.
You can determine 4G or 3G by looking on the Azuga Web
portal under Admin-Devices and check the Product Code
column. If the device starts with DCM970, you have the correct
OBD device that works with SafetyCam.
C
Verify the vehicle mapping in Azuga Fleet App
(If you got Azuga OBD device in the box)
In Packages with SafetyCam and OBD bundled together, the
Safetycam & your OBD comes automatically paired out of the
box. In case you have changed the pairing of the OBD device
and SafetyCam, you can refer to Step 3 of this guide to update
the associated vehicle with a particular SafetyCam.
B
Insert the OBD II Device
Once you have ensured you have the latest OBD device, plug it
into the OBD device port in your vehicle.
(888) 777-9718 | [email protected] | www.azuga.com
© 2019 Azuga, Inc. All rights reserved.
1