Aztech
WL889RT4 USER MANUAL
15
Encryption- Select for the encryption that suit your network best (WPA-mixed recommended)
Pre-Shared Key- Refers to the password of your wireless network
Note
Note
Note
Note
It is recommended to set other parameters to their default values unless you fully understand the effect of
that feature.
Access Control
Access Control
Access Control
Access Control
This feature allows you deny and permit access on the wireless network through the use of the
wireless clients’ MAC address
Disable- turn off this feature
Allow- Permits or allow all MAC address listed on the table to gain access to network
Deny- Denies all MAC address listed on the table to gain access to the network
WPS
WPS
WPS
WPS
This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this feature
could let your wireless client automatically synchronize its setting and connect to the Access
Point in a minute without any hassle.
Self-PIN Number- Enter this PIN to your wireless client or vice versa if you know the PIN
of your wireless client to configure the wireless settings automatically
Push Button Configuration (PBC) – Click Start WPS to start synchronizing with your
wireless client (You need to press/activate the WPS on the other wireless client within 2
min)
You can also press the WPS/Reset button found at the bottom of your router for 2 sec to
activate WPS.
Note
Note
Note
Note
WPS and Reset share the same button, pushing the WPS/Reset button for more than 5 sec will reset your
router back to factory default.
Firewall
Firewall
Firewall
Firewall
IP Filtering
IP Filtering
IP Filtering
IP Filtering
Here you can block access to the Internet with the use of IP
MAC Filtering
MAC Filtering
MAC Filtering
MAC Filtering
This feature allows you block access to your network for both wired and wireless clients.
Port Filtering
Port Filtering
Port Filtering
Port Filtering
This feature blocks access by the Port. Simply enter the port of the application and the protocol
used to block the application from your network
URL Filtering
URL Filtering
URL Filtering
URL Filtering
This feature you can block URL access by simply enabling URL Filtering and enter the URL address
that you want to deny on your network