U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
Item
Description
You are supplying a user name and password now.
The utility prompts you for them each time you try to connect to a network.
2. To provide a user name and password now, enter them in the fields
provided.
Not all values for
Authentication Mode
are available for all
Security
settings.
Enable CCX mode:
Enables connections in
CCX
mode. When checked,
additional authentication modes are available.
This checkbox is only enabled when
Super Profile
is set to
Enterprise
.
Configure:
Click
Configure
to open the configuration window.
Open Advanced Mode:
Click
Open Advanced Mode
to configure the
following screen
：
Power Save Mode:
Indicates whether to use power saving. This field can
be one of the following:
None:
No power save mode.
Max:
Max power save mode.
TX Power Level:
The transmit power level, which can be one of the
following:
Low Power
(6% of full power)
Medium-Low Power
(12%)
Medium-Power
(25%)
Medium-High Power
(50%)
High Power
(100%)
TX Rate:
The preferred rate of transmission, in Mbps. The options for this
field are based on the selected band and channel,
Packet Burst:
Indicates whether the Packet Bursting feature is enabled.
Turbo Mode:
Indicates whether the 4X feature is enabled.
Fragment Threshold:
The maximum fragment length, in bytes. The value
is an even number from 256 to 4096 (default is 4096).
RTS Threshold:
The minimum packet length for sending an RTS frame,
in bytes. The value must be greater than 0 (default is 4096).
Preamble:
Either short or long
Retry limits:
The number of retries to attempt, if necessary, when
sending a frame. There are two Retry limits fields:
Short:
For frames without an RTS frame
Long:
For frames with an RTS frame
To hide the advanced fields, click
Close Advanced Mode
.
OK:
When the configuration is done, click
OK
to save.
Cancel:
Click
Cancel
to discard changes.
Rescan
Searches for all available networks. Clicking on the button, the device will
start to rescan and list all available sites.
Configure
Click
Configure
to modify the settings for the profiles with the SSID of the
selected network.
If no profile exists, the
Profile Configuration
window is displayed so that
you can create a profile. The Profile Name field is blank.
If profile exists, the
Profile Configuration
window is displayed so that
you can modify its settings.
P
P
a
a
g
g
e
e
2
2
0
0
o
o
f
f
2
2
4
4
