U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
Item
Description
Select
Hexadecimal (Hex)
if you are using hexadecimal numbers (0-9, or
A-F).
Select
ASCII
if you are using ASCII characters (case-sensitive). ASCII
characters are: 0,1,2,...8,9 and a,b,c,d,...x,y,z.
10 Hexadecimal
digits or
5 ASCII
characters are needed if
64-bit WEP
is
used;
26 Hexadecimal
digits or
13 ASCII
characters are needed if
128-bit WEP
is used;
58 Hexadecimal
digits or
29 ASCII
characters are needed if
256-bit WEP
is used.
For example, the characters “
1122aabbcc
” are in
10 Hexadecimal
digits.
For example, the characters “
test1
” are
5 ASCII
keys.
WPA2 & Any WPA:
(
WiFi Protected Access
）
is more secure than WEP,
and should be used if possible.
Authentication Mode:
Determines the type of authentication to use for this
connection.
With
Super Profile
set to
Personal
, this field can be one of the following:
Open:
If your access point/wireless router is using "Open" authentication,
then the wireless adapter will need to be set to the same authentication
type.
Shared Key:
Shared Key is when both the sender and the recipient share
a secret key.
Auto Switch:
Select Auto Switch for the adapter to automatically select
the appropriate
PSK:
In the Passphrase field, enter the key that you are sharing with the
network for the WLAN connection. By default, the key that you type is
masked with asterisks (*). To view the key that you entered, check
Unmask.
With
Super Profile
set to
Enterprise
, this field can also be one of the
following:
TLS
PEAP – MS-CHAP-V2
(only with CCX mode enabled)
PEAP – GTC
(only with CCX mode enabled)
LEAP
(only with CCX mode enabled)
The
Personal Certificate
window enables you to supply a personal
certificate for use with TLS and PEAP – MS-CHAP-V2 authentication.
This window is only applicable with Enterprise security.
Personal Certificate:
P
P
a
a
g
g
e
e
1
1
8
8
o
o
f
f
2
2
4
4
