Installation of the Module
The module is intended only for OEM integrators under the following conditions:
1.
The antenna must be installed such that it is a distance of at least 20 cm between the
antenna and users.
2.
The antenna must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi transmitter product codes.
3.
The module will only be installed in mobile applications as defined by part 2.1091(b).
4.
Separate approval is required for all other operating configurations, including portable
configurations with respect to CFR Title 47 Part 2.1093 and different antenna configurations
5.
The host product manufacturer is responsible for ensuring that the final product with the
module installed and fully operational complies with all applicable FCC equipment
authorizations regulations, requirements and equipment functions. Refer to CFR Title 47
Part 2 Subpart J Equipment Authorization Procedures, KDB 784748 D01 V07 Labeling
Guidelines, and KDB 997198 Importation Guidelines.
Any changes or modifications of this product, not approved by manufacturer will void the user’s
authority to operate the equipment.
The end user of the final product should not have access to any instructions on installation and un-
installation of the module from its host device. No installation or un-installation instructions will be
provided to end user. The only instruction required by the end user is on how to power on the device.
End Product Labeling
The Radio module is authorized for use in a host device authorized by the original module
manufacturers. The final end product must clearly identify that the end product contains an FCC
approved RF module. The final host must be labeled with the following, or similar:
“Contains FCC ID: SCLS2010816”
“Contains IC: 4695A-S2010816”
The following statements must also be visible on the end device or in the manual for the end device.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a distance of at least 20 cm between the radiator
and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
IC Interference Statement
“This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.”
