
81
Solution
1.
Use the
display acl ipv6
command to check the configured IPv6 ACL rule. Make sure that the
IPv6 ACL rule conforms to the IPv6 multicast group policy to be implemented.
2.
Use the
display this
command in MLD snooping view or the corresponding interface view to
check whether the correct IPv6 multicast group policy has been applied. If not, use the
group-policy
or
mld-snooping group-policy
command to apply the correct IPv6 multicast
group policy.
3.
Use the
display current-configuration
command to check whether the function of dropping
unknown IPv6 multicast data is enabled. If not, use the
mld-snooping drop-unknown
command to enable the function of dropping unknown IPv6 multicast data.