Azio ENC311-C41, Руководство пользователя

Страница: 27 / 35

Copyright © 2006 by AZiO Corp. – www.aziocorp.com 27
Frequently Asked Questions
Q: Can I use my External Drive on two computers at the same time?
A: No. The Drive can only be used with one computer at a time. If you connect
the Drive to two computers at the same time, you may damage the Drive and
the computer.
Q: Can I format the Drive for multiple operating systems?
A: If you need both Mac and PC compatibility, you can format the Drive using
the FAT32 file system (on a PC) or the MS-DOS file system (on a Mac). Note:
FAT32/MS-DOS formatted disks or disk partitions that are greater than 128 GB
will not mount on Mac OS 10.2 through 10.2.8.
Q: What is the difference between FAT32 and NTFS?
A: FAT32 is an older and more compatible file system but it has certain
limitations, such as file size (maximum 4 GB). NTFS is more secure and has
fewer limitations. The NTFS file system can only be used on Windows 2000 and
XP. If you plan to use your drive on Windows 2000/XP only, consider
reformatting the Drive using the NTFS file system. If you plan to use your drive
on a Mac OS only, consider reformatting the Drive using the Mac OS Extended
file system.
Q: Does the AZiO External Drive work on Windows XP Media Center
Edition?
A: No. It is not supported at this time.
Q: Do I need drivers for my External Hard Drive?
A: For USB 2.0 on Windows 98SE, you will need to install the USB 2.0 driver
found on the supplied USB 2.0 Installation CD. All other supported operating
systems have the necessary USB 2.0 driver built in, with the exception of Mac OS
9, which supports USB 1 but not USB 2.0. You can connect the Drive to a USB 1
port, but it will operate at USB 1 speeds (up to 12 Mbps). Depending on your
operating system, you may need to download an update from the OS
manufacturer
Q: Is the AZiO External Drive compatible with Windows 95, 98 (1
st
Edition), or NT 4.0?
A: No.
Q: What should the jumper settings on my hard drive be set to?
A: The jumper should be set to “MASTER” or “SINGLE”. This does not apply for
SATA hard drives.