Page 3
INSTALLING RAILING WITH GLASS INFILL
FOR CLASSIC COMPOSITE SERIES AND RESERVE RAIL
Post Cap (2)
Top Rail (1)
Mounting Bracket (4)
Support Rail (2)
Top Glass
Channel
Bottom Glass
Channel
Rubber
Gasket (2)
Glass Panel (not
included)
Support Block (2)
Universal
Bottom Rail
Post Sleeve (2)
Post Skirt (2)
Foot Block
(1 in 6' Section)
IMPORTANT NOTES:
• TimberTech Railing for Glass Infill is available in 6' lengths.
• Visit https://www.timbertech.com/installation-help to view
TimberTech installation videos.
• Consult your local building codes for guard and handrail
requirements.
• TimberTech Railing 6' Rails are designed not to exceed 6'
from center of post to center of post.
• For all other applications, consult a design professional or a
TimberTech Railing representative for more information.
• 4x4 lumber posts must be installed plumb and level with
each other.
• Cut slowly, using a thin kerf, finish saw blade to avoid
chipping.
• Read instructions completely to get an understanding of
how the product goes together and how each piece affects
the other.
• For all applications, a structural post must be used inside our
Post Sleeve.
This entire section of instructions is for installation of Classic
Composite Series and Reserve Rail systems. Installation of the
RESERVE RAIL system is identical to the Classic Composite
Series, except it uses the RESERVE BOTTOM RAIL instead of
the Universal Bottom Rail.
TOOLS REQUIRED
• Miter Saw
• Drill
• 7/64" Drill Bit
• 3/16" Drill Bit
• Measuring Tape
• Caulk Gun
