1. Setting the Clock:
1-1:
To set the clock, press and hold the “CLOCK”
button while selecting the Up or Down arrows.
(Pay attention to the PM indicator light).
2. Function of each Mode:
2-1:
DUSK ON/TIME OFF
- Darkness will trigger the lights
to come on.
2-1-1:
To set the off time; Press and hold the
“TIME OFF” button while selecting Up or Down
arrow buttons. (Pay attention to the PM indicator).
2-2:
TIMER
- TIME ON and TIME OFF times must be set.
2-2-1
: Press and hold the TIME ON button, then press the Up or Down arrow buttons to adjust
to the desired TIME ON.
2-2-2:
Press and hold on the TIME OFF button, then press the Up or Down arrow buttons to adjust
to the desired TIME OFF.
2-3:
AUTO
- Uses the Photo Eye trigger control.
It turns off when there is light on the eye for over one minute and turns on when there is no light on
the eye for over one minute.
2-4:
OFF
- Power Pack will not come on.
2-5:
ON
- Power Pack is always on. Use this mode for other home automation systems.
2-6:
4 / 6 / 8 / 10
- Uses the Photo Eye trigger control.
The Power Pack will come on at dusk and will shut off after the selected amount of hours (4, 6, 8 or 10).
WARNING: Dimmer function is always invoked on all modes. If using non
dimmable LED lights, make sure the white mode knob is all the way turned to
clock wise position for maximum and full brightness.
press and hold
selecting Up or Down arrows.
1
2
Figure 1-1
press and hold
selecting Up or Down arrows,and
pay attention to PM indicator.
1
2
Figure 2-1
Operating Instructions
150W Power Pack
