Azden Moto ID, Руководство по эксплуатации

Страница: 7 / 17

6
● Wireless headphones (receiver)
(1) Ear pad (left)
(2) Power button: Pressing and holding the button (approximately two (2) seconds) allows
you to turn ON/OFF. It mutes sound while the button is pressed.
(3) Battery cover: Batteries (two (2) AAA batteries) are installed and removed by removing
the battery cover. ( slightly turn to unti-clockwise direction and pick up.)
(4) Power Status indicator (blue/red LED): It is illuminated/flashes when the power supply is
ON. It is in blue normally, and turned to red when remaining battery capacity becomes low.
It is illuminated constantly during audio playback, and it slowly flashes when no radio
wave is received or audio is not input. It rapidly flashes during pairing operation.
(5) Ear pad (right)
(6) PAIR button: Used for pairing.
(7) Volume control: Adjusting sound level.
(8) IR LINK button: For Jump-in feature. It is used during infrared ray communication.
(9) Infrared ray communication window: It is an optical transmitter/receiver for infrared ray
communication.
(10) φ3.5 mm stereo mini jack: The dedicated code is connected in case of using as a wired
headphone.
(9)
Infrared ray communication window
(6) Pair button
(5) Ear pad ( Right )
(1) Ear pad ( Left )
(10) φ3.5 mm stereo mini jack
(3) Battery cover
(2) Power button
(4) Power Status indicator
(8) IR LINK button
(7) Volume control
English
Component