Azden Moto ID, Руководство по эксплуатации

Страница: 11 / 17

10
● Pairing
* It is operated with the power of both devices
* Operate with Status indicator of power illuminates in blue.
There are two types of methods for pairing.
1. For pairing headphone using transmitter (standard procedure)
STEP1
Pressing the ID button of the transmitter for about three (3) seconds with a harp edge
such as the point of a pen flashes the Power supply/Status indicator rapidly for about
ten (10) seconds.
STEP2
Pressing the PAIR button of the head phone for three (3) seconds or more flashes the
Status indicator of power rapidly for about ten (10) seconds. Also, you will hear a beep-
ing sound (long "puh") from the headphone.
STEP3
Setting both devices in rapid flashing (approximately ten (10) seconds) state runs the
pairing. Completion will illuminate the Power Status indicator of the headphone for
about three (3) seconds. In addition, you will hear a beeping sound (long "puh") once to
enable audible checking.
* You can start either from "STEP1" or "STEP2".
* Multiple headphones can be paired simultaneously while the transmitter is flashing for
ten (10) seconds.
Transmitter Headphone
Power Status indicator
Left Housing
Power Status indicator
ID button
PAIR button
POWER button
English
How to use