SAFETY CAUTION
Congratulations on purchasing the Azden® i-Coustics™
PRO-XD Digital Wireless Microphone System. The
PRO-XD was designed to provide amateur and semi-
professional video producers alike with a high quality,
yet affordable wireless audio solution.
The PRO-XD is Azden’s first wireless system to use
2.4GHz digital wireless technology, which vastly
improves on sound quality (over VHF) and eliminates
interference issues with radio and TV frequencies.
Compatible
with
DSLR
cameras,
camcorders,
smartphones, tablets and computers, the PRO-XD is a
versatile wireless microphone and its compact and
simple design makes it very user friendly.
Each PRO-XD system includes a body-pack transmitter
(PRO-XDT), receiver with attached shoe mount (PRO-
XDR), a lapel microphone (EX-503XD), audio output
cable, a TRRS adapter cable (HX-i) and a USB
charging cable with AC adapter.
WARNING
: DO NOT ATTEMPT TO OPEN THE CASING OR MAKE ANY MODIFICATION TO THE
INTERNAL ELECTRICAL COMPONENTS. ELECTRIC SHOCK OR INJURY MAY RESULT.
WARNING
: ANY UNAUTHORIZED MODIFICATION TO THIS PRODUCT WILL VOID ANY APPLICABLE
WARRANTIES.
WARNING
: DO NOT STORE OR OPERATE THIS PRODUCT NEAR A HEAT SOURCE OR IN AN
ENVIRONMENT OF EXTREME TEMPERATURES. AVOID EXPOSURE TO RAIN OR ANY OTHER SOURCE
OF MOISTURE. DO NOT SUBMERGE IN WATER. IF EXTERIOR IS EXPOSED TO WATER, WIPE DRY
BEFORE USE.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).
Radiation Exposure Statement
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 1.5 centimeters between the radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance
of at least 1.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules and with RSS-247 of the Industry Canada Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
PRO-XDT
PRO-XDR
EX-503XD
HX-i TRRS
Adapter
AC Power
Adapter
USB-mini to
USB-A Cable
Audio Output
Cable
PRO-XD Kit Contents
1
Using The Aux Input
A unique feature on the PRO-XDT transmitter is the inclusion of a 3.5mm stereo Aux Input. This input is
intended for a line level signal and will not work with microphones (to use a microphone, plug it into the
transmitter’s MIC IN). To use the Aux Input, push the Input Selector switch to the side with the letters “AUX
IN” or in the center to mix it with the Mic Input.
The Aux Input can be used to take any line level signal and transmit it wirelessly in stereo to the receiver.
The receiver will also output this signal in stereo (if a stereo output cable is used) via the microphone output
of the receiver. To record this signal in stereo, the recording device must also be able to accept a stereo
signal (mobile devices, for example, will only record in mono via a TRRS headset input).
There is a myriad of possible uses for the Aux Input, but one such use could be to connect the output of a
multi-channel mixer, thereby allowing you to wirelessly send a stereo mix of 2 or more microphones to the
receiver.
Internal Battery And Charging
The PRO-XDT transmitter and PRO-XDR receiver both have an internal lithium-ion rechargeable battery
inside. Both units charge via the USB mini port located at the bottom. You may use the included USB cable
and AC adapter to charge the units. Charging may also be done with 3rd party cables and AC adapters, or
by connecting the units to a standard computer USB port.
The total full charge time for either unit is approximately 3 - 3.5 hours. The max run time from a full battery
on the transmitter is approximately 11 hours while for the receiver it is approximately 16 hours. It is also
possible to operate the receiver and transmitter while being charged.
Reset Button
Both the transmitter and receiver have a recessed reset button located on the back. The reset button acts as
a back-up to the power button’s “off” function. In case either unit is unresponsive, the reset button can be
used to power off. To use the reset button, the unit must be powered on. Press the reset button by using a
thin, rigid object like a paper clip; push and hold for 1 second and then release. The unit will power off and
need to be turned on again.
8 Tips For Best Results
1. For each use of the PRO-XD be sure to start with both units fully charged.
2. Position the transmitter and receiver with as few physical obstacles between them as possible. A clear
line-of-sight is always best.
3. The human body is an efficient absorber of 2.4GHz signals. Keep this in mind when choosing where to
clip the transmitter or where to mount the receiver. Clipping the transmitter behind a person’s back or
placing it in a back pocket, for instance, may reduce the range of the system.
4. When using the PRO-XD with a camera, set the volume level of the receiver to its maximum and then
reduce the gain at the camera to get a strong audio signal without overloading. If additional reduction in gain
is still needed, back off the volume on the receiver until levels are optimized. In general, it is best to engage
the preamp on the camera as little as possible.
5. The PRO-XD system will work reliably at a distance up to 35 meters (or possibly much more) in optimal
conditions. However, its performance at long distances depends heavily on the Wi-Fi environment and clear
line-of-sight.
6. Always test the PRO-XD system in a new location by monitoring its performance for a few minutes before
beginning your shoot.
7. Crowded Wi-Fi environments can make it challenging for the PRO-XD to find a clear channel on which to
connect. A crowded Wi-Fi environment will also limit the number of PRO-XD systems that can be used
simultaneously in the same area. Consider these limitations when choosing your location.
8. When experiencing connectivity problems, turn off all unnecessary 2.4GHz wireless devices in the area if
possible. This includes devices like routers, hot-spots, Bluetooth devices, computers, cell phones (use
airplane mode), etc.
6
