Azbox SD99010A, Руководство пользователя

Страница: 21 / 46

key can enter satellite list for you to select directly.
2
LNB Freq
: In this item, press [Volume Up/ Volume Down] key can select the parameter. Option is
5150/5750/5950/9750/10600/10700/10750/11300/5150-5750/Universal(9750-10600)
/Universal(9750-107500)/and MDU
3
DiSEqC1.0/1.1
: You can use [Volume Up/ Volume Down] key to switch options. There are several
options for your selection: Disable / LNB1 / LNB2 / LNB3 / LNB4
4
22K
: You can use [Volume Up/ Volume Down] key to switch “ON / Off”. When this item is
switched to “ON”, receiver will receive TV and radio input signal from 22K port. If the item is
switched to “Off”, the receiver will receive all signal from 0K port.
!
Notice
When you choose LNB type “Universal”, you can not modify 22K.
5 Polarity: In “Polarity” item, [Volume Up/ Volume Down] key to switch “Auto/ H / V” functions.
6
Motor
：
You can use [Volume Up/ Volume Down] key to set Antenna type by Motor
7
Unicable
：
You can use [Volume Up/ Volume Down] key to set unicable enable or none
6.1.3 Motor Antenna
1
Motor Type: DiSEqC1.2/USALS
2 Motor Setting:
If you select “DiSEqC1.2”, “Local Longitude / Local
Latitude” is not available. It will show the screen like
below:
When the highlight on the mode item
，
You can use [Volume Up/ Volume Down] key to set Motor function
Automatic SAT Scan
you can find sub-menus for Satellite, Transponder, Polarity, NIT, program ,Scan mode ， scan
select
，
Signal Quality Bar and etc. and press GREEN key to start channel search
1
、
Satellite: Select the satellite what you want to search the channel
2 、 Transponder : Select the desired TP (transponder).
3
、
NIT
：
scan by nit search mode
4 、 Program ： scan by all/free only
5
、
Scan mode
：
default
、
one Tp
、
blind scan
6
、
Scan select
：
single sat
、
all sat
7 、 Signal Intensive / Quality Bar : They show the strength and quality of signal from LNB.
21