Azbil NX-SVG, Руководство по установке, Страница: 7 / 16

E1
CP-UM-5928JE
Network Instrumentation Modules
Smart Device Gateway
Model NX-SVG
Installation Manual
Thank you for purchasing an Azbil Corporation product.
This manual contains information for ensuring the correct use
of this product.
This manual should be read by those who design and main-
tain equipment that uses this product.
Be sure to keep this manual nearby for handy reference.
Please read “Terms and Conditions” from the following URL
before ordering and use.
https://www.azbil.com/products/factory/order.html
NOTICE
Be sure that the user receives this manual before the product is used.
Copying or duplicating this user’s manual in part or in whole is
forbidden. The information and specifications in this manual are
subject to change without notice.
Considerable effort has been made to ensure that this manual is
free from inaccuracies and omissions. If you should find an error or
omission, please contact the azbil Group.
In no event is Azbil Corporation liable to anyone for any indirect,
special or consequential damages as a result of using this product.
SAFETY PRECAUTIONS
Safety precautions are for ensuring safe and correct use of
this product, and for preventing injury to the operator and
other people or damage to property. You must observe these
safety precautions. Also, be sure to read and understand the
contents of this user’s manual.
If this equipment is used in a manner not specified by the
manufacturer, the built-in protection provided by the equip-
ment will be impaired.
z
Key to symbols on the side of the case
WARNING
Warnings are indicated when mishandling this prod-
uct might result in death or serious injury to the user.
CAUTION
Cautions are indicated when mishandling this product
might result in minor injury to the user, or only physi-
cal damage to this product.
WARNING
Before removing, mounting, or wiring this device, be sure
to turn off the power to the device and any connected
devices.
Failure to do so might cause electric shock.
WARNING
Be sure to check that this device has been correctly
wired before turning on the power. Incorrect wiring of
this device may lead to hazardous conditions or device
failure.
CAUTION
Install or remove the DIN rail locking tab using a tool
such as a screwdriver. Otherwise, you might be injured.
Do not disassemble this device.
Doing so might cause device failure.
Do not block ventilation holes.
Doing so might cause fire or device failure.
Do not allow wire clippings, metal shavings or water to
enter the case of this device.
They might cause fire or device failure.
Do not touch live parts such as the power terminals.
Doing so might cause electric shock.
Before wiring this device, except when connecting net-
work cables, be sure to turn off the power.
Failure to do so might cause device failure.
Wire this device correctly by using the wiring method,
power, and installation method specified in this user’s
manual.
Failure to do so might cause electric shock, fire or de-
vice failure.
Make sure that there are no loose connections. Failure
to do so might cause overheating or device failure.
Supply power to all linked modules from the same
power source. Using two or more power sources can
cause fire or faulty operation.
Do not use unused terminals on this device as relay
terminals. Doing so might cause electric shock, fire or
device failure.
Firmly tighten the terminal screws to the torque listed
in the specifications. Insufficient tightening of terminal
screws might cause electric shock or fire.
If there is a risk of a power surge caused by lightning,
use a surge absorber (surge protector) to prevent fire or
device failure.
Use this device within the operating ranges given in the
specifications (temperature, humidity, voltage, vibra-
tion, shock, mounting orientation, atmosphere, etc.).
Failure to do so might cause fire or device failure.
This device should be handled by a specialist with ex-
pertise in electrical safety.
Otherwise, there is a danger of electric shock.
If this device is used in the manner not specified by the
manufacturer, the protective function of the device may
be impaired.
When removing dirt from the device, never use an or-
ganic solvent such as thinner or benzene, or a detergent.
Doing so might cause device failure.
Make sure that devices and equipment connected to
this device have reinforced insulation suitable for the
maximum operating voltage of this device’s power sup-
ply and input/output components.
Failure to do so might cause electric shock, fire or de-
vice failure.
Use a battery that meets the specifications given in this
document. Otherwise, there is a danger of fire or device
failure.