AB-6546
7
Specifications: Model RY5001Q0000 (Integral Type)
Main unit specifications
Item Specification
Ambient temperature
0
°
C to 50
°
C
Ambient humidity
10 %RH to 90 %RH (Non-condensing)
Altitude
2000 m or lower
Rated operating
conditions
Vibration
When assembled with Infilex AC:
5.9
m/s
2
or less at 10 Hz to 150 Hz
When assembled with Infilex GC/Infilex GD:
3.2
m/s
2
or less at 10 Hz to 150 Hz
Ambient temperature
-20
°
C to 60
°
C
Ambient humidity
5 %RH to 95 %RH (Non-condensing)
Vibration (for storage)
When assembled with Infilex AC:
5.9
m/s
2
or less at 10 Hz to 150 Hz
When assembled with Infilex GC/Infilex GD:
3.2
m/s
2
or less at 10 Hz to 150 Hz
Environmental
conditions
Transport and
storage
conditions
Vibration (for transport)
9.8 m/s
2
or less at 10 Hz to 150 Hz
7 segment LED
4 digit
×
2 lines (Upper line in green, lower line in red)
Upper line: Point number is displayed.
Lower line: Max. 6 digit number is displayed. (Upper 2 digits are
displayed first, and lower 4 digits are displayed with [
∧
] key.) For the
decimal number, max. 3 digits after the decimal point are displayed.
Display
LED
Dot LED for status indication
[OFF], [ON], and [
→
] in green
[ALM] in red.
Material Silicon
rubber
Input
Key
Key names
[MODE], [
∧
], [
∨
], [ENTER], [
→
]
Weight 170
g
Material / color
Modified PPE / light gray
Wiring specifications
Item Wiring
Wiring
length
Condition
Remote Controller bus
Model DY7210 Connector cable,
Model DY7220 Short connector cable, or
EIA/TIA-568 Category 3 or over
50 m
⎯
Model Numbers: Model RY5001Q0000 (Integral Type)
Base model number
⎯
⎯
Description
RY5001
Operator Panel for Infilex AC / Infilex GC / Infilex GD
Integral type (Assembled with Infilex AC / Infilex GC / Infilex GD)
Q
⎯
0000
⎯
Note:
Operation manual for Model RY5001Q0000 (AB-6642) is available. When you order the product, request the manual if necessary.
CE Marking Conformity
This product must be installed in a panel cabinet. Besides, the product in the panel cabinet must be out of reach of
unauthorized people who are not well-trained for electric facilities.
This product complies with the following Electromagnetic Compatibility (EMC) and the Low Voltage Directive (LVD).
EMC: EN61326-1 Class A, Table 2 (For use in an industrial electromagnetic environment)
LVD: EN61010-1 Overvoltage category II
Pollution degree 2
