Azbil BC-R35 Series, Спецификация

Страница: 3 / 17

3
บริษัท เอดีดี เฟอร์เนส จ ำกัด
ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวีวัฒนำ กรุงเทพฯ 10170
โทร
: 02-888-3472
โทร
:
ออกแบ บ
:
08-08-170-170
แฟกซ์
: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
*1 Item in ( ) is for the case of direct ignition.
*2 Visible light flame detector and contact input are 35s only.
*3 Visible light flame detector and contact input model do not have the low fire shutdown function.
*4 During postpurge after a warning, no reset input is accepted until postpurge is complete.
Also, reset input is not accepted if no warning has occurred.
Transporta- tion
and stor- age
condi- tions
Ambient tempera- ture -20 to +70°C
Ambient humidity 5 to 95 % RH (no condensation)
Vibration 0 to 9.8 m/s
2
(10 to 150 Hz, 1 octave/minute, 10 cycles, in each of XYZ directions)
Shock 0 to 300 m/s
2
Packaged drop test
60 cm drop height (free drop onto 1 corner, 3 edges, 6 sides)
Operating
conditions
Ambient tempera- ture -20 to +60 °C
Ambient humidity 10 to 90 % RH (no condensation)
Vibration 0 to 3.2 m/s
2
(10~150Hz, 1 octave/minute, 10 cycles, in each of XYZ directions)
Shock
0 to 9.8 m/s
2
Mounting angle Reference plane +/-10 °
Dust 0.3 mg/m
3
or less
General
specifications
Protective structure IP40 (with a sideboard ( 81447515-001) attached to the sub-base (BC-R05)) IP10 (sub-base
(BC-R05) only)
Excess voltage cat-
egory
II
Pollution degree PD2
Case color Black
Case material Denatured PPE resin (UL94-V0 PTI materials group IIIa)
Structure
Sub-base and main unit
Mounted
orientation
Vertical or horizontal
However, in horizontal mounting the 7-segment display must face directly upward (DIN rail
mounting or direct mounting through base screw holes)
Standards
JIS C 9730-2-5
EN 298 (0063BS1427)
Dimensions W95 × H105 × D110 mm
Weight Approximately 600 g (incl. sub-base)
Wiring types and max. wiring length -
Start, airflow switch, lockout interlock, POC (shutoff valve proof of closure), low fire interlock, high fire interlock Copper IV wire
with 600 V vinyl insulation, 1.25 mm
2
, recommended condition: 20 m or less,
maximum wiring length: 100 m
-
Contact reset
Copper IV wire with 600 V vinyl insulation, 1.25 mm
2
, maximum wiring length: 10 m
- AUD100/110/120 (F, G)
Copper IV wire with 600 V vinyl insulation, 1.25 mm
2
, maximum wiring length: 100 m
-
Flame rod (F, G)
RG-11U (JAN standard: US DoD compliant specification) or equivalent, 5C2V, 7C2V (JIS standard) Recommended condition: 20 m
or less, maximum wiring length: 30 m
- AUD100/110 (F, G)
Copper IV wire with 600 V vinyl insulation, 1.25 mm
2
, maximum wiring length: 10 m
-
RS-485 communications (3-wire system)
0.2 to 1.5 mm
2
shielded, twisted pair cable (recommended) Maximum wiring length: 500 m
- Signal line for flame voltage output
IV wire, 0.75 mm
2
or larger, max. wiring length 10 m