background image

Disposal

• 

This product is subject to the  European Waste Electrical and Elec-

tronic Equipment Directive (WEEE). Do not dispose with your normal 

household waste. Dispose of this device through an approved waste 

disposal firm or through your local waste facility. When discarding the 

device, comply with the rules and regulations that apply in your country. If in 

doubt, consult your local waste disposal facility.

• 

For the transport and protective packaging, environmentally friendly materi-

als have been chosen that can be supplied to normal recycling. Ensure that 

plastic bags, packaging, etc. are properly disposed of. Do not just dispose 

of these materials with your normal household waste, but make sure that 

they are collected for recycling. Please follow the notes and markings on the 

packaging.

• 

Batteries must not be disposed of as domestic waste or thrown into fire. 

Dispose of the batteries according to national or local regulations regarding 

hazardous waste. To protect the environment, dispose of empty batteries at 

your retail store or at appropriate collection sites.

Musikhaus Thomann e. K. • Treppendorf 30 • 96138 Burgebrach • Germany • www.thomann.de

Содержание AZ8922













Отзывы: