Ayrton VersaPix-RS, Руководство пользователя

Страница: 5 / 16

USER MANUAL _
5
The VERSAPIX-RS luminaire has an IP20 protection rating. It is intended
strictly for indoor use. It must never be partially or fully submerged, even
temporarily.
Condensation may form on your VERSAPIX-RS in the following cases:
• Immediately after turning on the heating
• In places with fog or a high level of humidity
• When the luminaire is suddenly moved from a cold to a warm
environment, or vice versa.
In such cases, you must wait until the luminaire readjusts to the ambient
temperature of the room where it will be installed for operation.
Do not shake the VERSAPIX-RS while installing or handling.
Do not pull the VERSAPIX-RS by one of its cables to move it. Lift the
luminaire by its handles.
Choosing the appropriate place to install the VERSAPIX-RS is essential.
The following points should be observed:
• Do not expose it to a heat source.
• Do not install it near flammable materials.
• Be sure that dust or miscellaneous debris cannot clump around the
body of the luminaire as this may interfere with its optimal cooling and
proper operation.
• The VERSAPIX-RS must be installed out of reach of the public and all
persons not authorized to operate the luminaire.
We recommend a minimum distance of 20 cm between the outside
surface of the light and the illuminated object.
Due to the nature of its cooling principle, you should never prevent air from
circulating around the body of the luminaire. You must provide a minimum
clearance of 20 cm around your VERSAPIX-RS to allow for cooling.
The VERSAPIX-RS can be installed in a ground pit or any other confined
enclosure only under certain conditions. With this kind of installation, a
system of forced ventilation should be used up to allow air to circulate
freely around the luminaire(s). The air must be constantly renewed
because the luminaire cannot be operated in closed system. Failure to
comply with these requirements may destroy or prematurely wear the
VERSAPIX-RS, and AYRTON cannot be held responsible. Please consult
your AYRTON dealer for more information on this type of installation.
No load should be placed on the VERSAPIX-RS. The fixture must not be
installed in such a way as to allow a person, vehicle or any object to run
over or park on it.
Never lay or drop any hard, heavy, or blunt, objects on the VERSAPIX-RS.
This includes items made of glass or porcelain (e.g., bottles, dishware,
or glass beads). The luminaire is made of materials such as plastic and
extruded aluminum, making it resistant but not unbreakable. Objects
made of hard materials such as steel or glass that fall on the unit may
cause breakage of the plastic parts or the body. AYRTON cannot be held
responsible for the luminaire’s broken plastic parts or body, which are not
covered under warranty.
The temperature of the room where the VERSAPIX-RS is installed must
never exceed 45°C (Ta = 45°C).
The VERSAPIX-RS luminaire requires a 110-240 VAC supply voltage.
Check that your luminaires have been installed for an application that is
compatible with this information.
Check that the bracket on which you hang or attach your VERSAPIX-RS
can sustain the weight of the luminaire (8,8 kg), taking into consideration
all necessary safety factors.
Do not use your VERSAPIX-RS before being familiar with these
recommendations and do not allow unqualified personnel to handle the
product.
To transport your VERSAPIX-RS, we strongly recommend that you use the
complete original packaging, including the dense protective foam inserts.
If your VERSAPIX-RS is not being used for a long period, you should
disconnect the luminaire from the power source.
Never dispose of the VERSAPIX-RS in a rubbish bin. Ensure that it is
recycled. Please consult the current legislation in your country on recycling
electronic equipment.
WARNING!
The number of daisy chain, or tandem, connections to the VERSAPIX-
RS (power input and output sockets on the luminaires) is limited for
safety reasons. The maximum authorized number of connections is
as follows, with the power line protected by a 10A circuit breaker.
• 10 VERSAPIX-RS units on the same source at 230 VAC or
• 5 VERSAPIX-RS units on the same source at 110 VAC
PRESENTATION AND FEATURES
VERSAPIX-RS is a non-waterproof moving head wash light (IP20
protection rating) using the latest generation of high-performance of
LED-type lamps.
This luminaire can be controlled remotely by an external DMX512 signal.
The VERSAPIX-RS incorporates multi-chip LED using 4 colors: Red,
green, blue and white.
This color-light luminaire operates on the CMY additive color principle
and along with white light can potentially render a palette of 4.2 billion
colors.
The VERSAPIX-RS has a total of 5 LED. The luminaire requires from 6
to 29 DMX channels to be controlled via an external command system
that sends a DMX512 signal (see below for details).
To adjust the settings on the VERSAPIX-RS (i.e., DMX address, DMX
operating mode and other options), a Remote Device Management
(RDM)-type DMX controller may be required. The DMX RDM protocol is
a universal, widely used standard.
There are a multitude of RDM DMX controllers on the market from different
manufacturers (excluding AYRTON). It is worth noting that an RDM DMX
controller is not required to change the settings on the VERSAPIX-
RS. A light console or any standard DMX-type controller is sufficient.