Ayrton VersaPix-RS, Руководство пользователя

Страница: 4 / 16

USER MANUAL _
4
INTRODUCTION
Thank you for selecting the AYRTON VERSAPIX-RS luminaire.
WARNING !
This product is not suitable for household use.
You now own a professional lighting unit that offers endless possibilities.
Before installing, make sure that no damage was done to your luminaire
during transport. If this is the case, do not use the product and immediately
contact your authorized AYRTON dealer.
For your own safety and that of others, please read this instruction manual
carefully before installing the unit.
Anyone involved in installing, operating or servicing the VERSAPIX-RS
must:
• Be a qualified, authorized professional
• Strictly follow the instructions in this user manual.
Please take the time to read this manual carefully and thoroughly before
installing and operating the luminaire. You should have a good knowledge
of its operating conditions and all pertinent product information.
After you have become familiar with this manual, we recommend that
you keep a copy for future use. All the information found in this manual
is subject to change without notice. AYRTON reserves the right to modify
and upgrade its range of products, with no obligation to integrate these
changes into products already sold.
SAFETY INSTRUCTIONS
Please read the safety instructions and warnings in this manual carefully
before installing and operating the VERSAPIX-RS.
WARNING!
Risk of electric shock.
Use caution when handling. This luminaire requires high voltage,
which can result in electric shock.
The VERSAPIX-RS left our factory in perfect working condition. However, if
you notice a defect, immediately contact your authorized AYRTON dealer
before use. The manufacturer cannot be held responsible for damages
caused by a failure to follow the safety, installation or assembly instructions
contained herein, or by any modification made to the luminaire.
Failure to observe the safety, installation or assembly instructions
contained herein, or any modification made to the VERSAPIX-RS luminaire
will render the warranty null and void.
Check that the supply voltage does not exceed the maximum authorized
limit. Check that your electrical installation complies with current
standards.
In all cases, make sure that the power cables attached to your VERSAPIX-
RS have not been damaged due to cuts and splices or crushed in any way.
Handle these cables with extreme caution while they are connected to a
power source.
Your VERSAPIX-RS conforms to Class 1 safety standards. The unit must
be grounded electrically. Make sure that the power source connected to
your VERSAPIX-RS is switched off before attempting any work on it.
Installation and connection to an electrical source must be performed
by an authorized installer. AYRTON declines all responsibility should this
luminaire be installed by an unqualified person.
Installation and connection to an electrical source must be performed
by an authorized installer. AYRTON declines all responsibility should this
luminaire be installed by an unqualified person.
Never disconnect your VERSAPIX-RS by pulling on the power cable!
First unlock the connector lock ring on the power cable until it is fully
disengaged, and then gently pull on the connector to disconnect the cable.
Do not connect or disconnect the power cable of your VERSAPIX-RS with
wet hands.
At first use, your VERSAPIX-RS may give off an odor. This is a normal
occurrence that should dissipate after a few minutes of operation.
WARNING!
Do not connect or disconnect the power cable at your VERSAPIX-RS
if the cable is energized! This could cause arcing and damage your
VERSAPIX-RS, requiring repair.
Be careful to power off your VERSAPIX-RS by removing the power plug
from the source, before connecting or disconnecting the luminaire.
WARNING!
This unit contains Class 2 LED emitters (EN60625-1): 1994)
This luminaire uses five (Class 2) LED-type (Light Emitting Diode) lamps.
Never look directly into the lamps if lit or stand directly in line with the
luminaire if close by.
Installation, removal or replacement of the unit must be performed with
power off to prevent any risk of glare and eye injury.
WARNING!
The fixture quickly becomes very hot during operation.
To avoid risk of burn, never handle or adjust the luminaire while it is
energized and after it has been lit for more than 10 consecutive minutes.
Some parts of the luminaire can reach a high temperature, particularly the
body/radiator. Turn off the luminaire and wait for it to cool before handling.
CONDITIONS OF USE
Your VERSAPIX-RS is a static luminaire equipped with 5 LED intended for
professional use (e.g., architectural, stage, television, theater, or museum
lighting).