Ayrton PERSEO S, Руководство пользователя

Страница: 45 / 52

44
12.
ERROR MESSAGES
When you turn on the device, it will first perform a reset
.
The display may show
“
Err channel is
XX
”
should there be problems with one or more functions
.“
XX
”
stands for channel 1 2 3
4 5 6 etc whose sensor has encountered a problem
.
For example when the display shows
“
Err
channel is Pan movement it means there is an error on channel 1
.
If there are errors on channel
1 channel 3 channel 6 at the same time you may see the error message
“
Err channel is Pan
movement
“
Err channel is Tilt movement
” “
Err channel is Shutter flash twice and then the
device will generate a second reset
.
If the error messages persist after performing a reset more
than twice the channels which have errors may not work properly however all other functions
can work as usual
.
Please contact your dealer or manufacturer for service
.
Self repair is not
allowed
.
PAN- movement Er
(PAN- yoke movement error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB)
.
The PAN- movement is not located in the
default position after the reset
.
TILT- movement Er
(TILT- head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions ((Optical Sensor or Magnetic Sensor fails)) or the stepper
motor is defective (or its driving IC on the main PCB)
.
The TILT- movement is not located in the
default position after the reset
.
Zoom wheel Er
(Zoom wheel error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB)
.
The Zoom - movement is not located in
the default position after the reset
.
Focus wheel Er
(Focus wheel error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB)
.
The Focus - movement is not located in
the default position after the reset
.
Color wheel Er
(Color wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The Color - movement is not located in the default
position after the reset
.
Cyan Color wheel Er
(Cyan Color wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The CMY - movement is not located in the default
position after the reset
.