Ayrton PERSEO S, Руководство пользователя

Страница: 3 / 52

2
1. SAFETY INSTRUCTIONS
1.1. IMPORTANT SAFETY WARNING
This device has left the factory in perfect condition
.
In order to maintain this condition and to
ensure safe operation it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual
.
In order to install operate and maintain the lighting fixture safely and correctly we suggest that
the installation and operation be carried out by qualified technicians and these instructions be
carefully followed
.
CAUTION!
HIGH VOLTAGE. RISK OF SEVERE OR FATAL ELECTRIC SHOCK
CAUTION!
ALWAYS DISCONNECT MAINS SUPPLY BEFORE REMOVING ANY FIXTURE
COVERS
CAUTION!
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE. SENSITIVE PERSONS
MAY SUFFER AN EPILEPTIC SHOCK
CAUTION!
NEVER TOUCH THE DEVICE DURING OPERATION! COVERS MAY BE HOT
CAUTION!
Warning Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Important:
Damage caused by the disregard of this user manual is not subject to warranty
.
The dealer
and manufacturer will not accept liability for any resulting defects or problems
.
If the device has been exposed to temperature changes due to environmental conditions
do not power on immediately
.
The resulting condensation could damage the device
.
Leave
the device powered off until it has reached room temperature
.
Ensure the sealing rubber covers of oower CON and XLR connectors are fitted properly
when the device is not in use
to avoid water ingress
.