Ayrton eurus s, Руководство пользователя, Страница: 48 / 48

47
13. CLEANING AND MAINTENANCE
The following points have to be considered during inspection
：
1) All screws for installing the devices or parts of the device have to be tightly connected and
must not be corroded.
2) There must not be any deformations to the housing
，
lenses
，
rigging and installation points
(ceiling ， suspension ， trussing).
3) Motorized parts must not show any signs of wear and must move smoothly without issue.
4) The power supply cables must not show any damage
， material fatigue or sediment.
Further instructions depending on the installation location and usage have to be adhered to by a
qualified installer and any safety concerns have to be removed.
In order to ensure the device remains in good condition and does not fail prematurely
， we suggest
regular maintenance.
1) Clean the inside and outside lens each week to avoid loss of output due to accumulation of
dust/ dirt on the lens.
2) Clean the fans each week to ensure maximum airflow and efficient thermal cooling.This will
ensure the light source is operated in the best possible condition.
3) A detailed electrical check by an approved electrician every quarter to make sure that the
circuit contacts are in good condition.This will prevent poor circuit contacts and the resultant
overheating.
We recommend frequent cleaning of the device.Please use a moist
， lint- free cloth.Never use
alcohol or solvents.
Please refer to the instructions under
“ Installation instructions ” .
Should you need any spare parts
，
please order genuine parts from your local dealer.
Remark : Errors and omissions for all information given in this manual are excepted. All
information is subject to change without prior notice.