Ayrton AYD-20, Руководство пользователя

Страница: 6 / 19

5
Instruction of Caster Wheel
1. Nip the groove at both sides of bucket and pull the bucket out by the arrow shown
direction. (As shown in fig.a)
2. Take out accessory box (there are 4 castors).
3. Refit the bucket by the arrow shown direction, then the unit is ready to be electrified and
turned on. (As shown in fig.c)
4. Take out 4 castors from accessory box.
5.
Tilt the dehumidifier no more than 45°. Aim the shaft of castor at the installation hole on
chassis, and then forcibly push the castor upward to let the locating ring on the shaft of
castor stick together with the side face of installation hole. (refer to Fig.d)
6. Install the 4 caster wheels on the dehumidifier.
NOTE:
1. Keep the dehumidifier balance during installation incase the dehumidifier falls.
2. Four caster wheels must be installed well before operating the unit.
Bucket
Accessory box
Fig. a Fig. b Fig. c
Locating ring
on the shaft
of castor
Fig. d