2
Assemble and Connect
Connect the "regular" side of the USB
cable to the power supply:
Connect the "micro" side of the USB
cable to the IndoorHub:
Plug the power supply into the wall and
wait for the IndoorHub to boot:
Wait for the light on the IndoorHub
to stay on solid (no blink) - this indicates
the IndoorHub has successfully checked in
to AyrMesh.com and downloaded its
con
�
guration. For a Gateway IndoorHub
(one connected to your network with an
Ethernet cable), that's it - mount the
IndoorHub where you want it. For a Remote
IndoorHub, that indicates it is initialized.
It can be disconnected from the Ethernet and
moved wherever you want it to be installed.
...And then connect the IndoorHub to
your network with an Ethernet cable
(use either port on the IndoorHub):
For best performance, mount IndoorHubs
�
high and "in the clear"
�
possible.
Make sure you have an account on
AyrMesh.com