7
Installation and maintenance
Mounting the bracket
A pre-mounted dual hanging bracket is provided, with screwknobs at both side of the brackets. These
brackets can be used to install the unit to a fixed structure, such as a T-bar or truss.
NOTE:
Always use both mounting points when installing this fixture!
Installing the fixture in a hanging position
When you wish to position the fixture against a wall, ceiling or beam, make sure to use proper
installation tools and let a skilled technician install the fixture for you.
When you wish to install the fixture to a lighting stand or truss system, use a G-clamp or halfcoupler
for optimal, safe and stable fixation. Check the technical specifications of your light stand or truss
system to gather more information on maximal loads and other safety precautions.
Transport
When using this fixture in mobile setups, provide sufficient protection during transport. Use the original
packaging of this unit, or use a professional flightcase with proper foam inlay. This way the electronics,
optics and housing are protected against severe shocks, exterior damage and failing electronics.
Replacing the internal fuse
First check whether a failing power supply may be the cause of malfunction. When you suspect that
the internal fuse is broken, the fuse can be replaced by removing the fuse cover, located directly next
to the power in/outlet.
WARNING:
Before changing the fuse, always disconnect the fixture from your wall outlet or any other
power supply to prevent electric shocks.
Always replace a broken fuse with a fuse that has the same type and rating. After the fuse has been
replaced, always close the fuse-cover. Reconnect the fixture to your power supply and check whether
the problem is solved. When this does not solve your problem, contact your local dealer for help.
Spare parts
This unit has no user serviceable parts inside. When any damage to internal components occur,
contact your local dealer or a specialized technician in order to repair the fixture.
Cleaning:
Clean the housing of the fixture frequently with a damp cloth, to remove dust and/or dirt.
WARNING:
Always disconnect the fixture from your wall outlet or other power supply and let the fixture dry before
reconnecting it. This prevents possible electrical shocks.
The lenses can be cleaned with a non-aggressive glass cleaning solution, but is not recommended.
Ayra recommends to clean the mirror and lens with a fine brush, while removing dust and/or dirt with a
vacuum cleaner. Avoid touching the lenses with your bare fingers, to prevent fingerprints on the optics.
Checkup
To prevent dangerous situations, make sure your fixture is in optimal condition before using it. Check
your fixture frequently by using the following checklist:
- All screws must be mounted tightly.
- Check all screws and metal parts for corrosion. No visible corrosion may be present.
- The exterior of your fixture must be in optimal condition. Check your fixture for dents, cracks or
missing parts.
- Your installation spot must be in optimal condition. Check your installation spot for corrosion, cracks,
