5
Setting up the unit
To activate the unit, connect the included power supply with the unit and a suitable 230V, 50 Hz power
outlet. The unit will activate directly after it is plugged in to a wall outlet or other power source.
The status of the fixture is shown on the display. Certain values determine the current status and will
change when you push buttons on the control panel. The buttons each have their own function, for
easy navigation in the control panel. When connecting the unit for the first time,
Press the ‘MENU’ button to switch modes, so you can easily select the built-in master/slave, music
controlled or DMX mode.
Press ‘Enter’ to confirm a setting.
Display codes:
AUTO = Gobo effect set (automatic program with one of the preset figures on a standard speed)
AUT1 = Gobo effect 1
AUT2 = Gobo effect 2
AUT3 = Gobo effect 3
AUT4 = Gobo effect 4
AUT5 = Gobo effect 5
AUT6 = Gobo effect 6
AUT7 = Gobo effect 7
AUT8 = Gobo effect 8
AUT9 = Gobo effect 9
AUTA = Gobo effect 10
AUTB = Gobo effect 11
SOU1 = Master fixture sound active (displayed through ON/OFF status)
SLAD = Slave function
SLA1 = Slave function 1
SLA2 = Slave function 2
ADDR = DMX address function, to set the DMX starting address
A001
– A512 = DMX address setting
TEST = Auto color check, all LEDs of each color will light up.
Music controlled mode:
The music controlled mode is used to play a series of programs on the beat of the music. For optimal
results, place the TDC 4 LED fixture close to a speaker or subwoofer. Too much distance or a lack of
bass will cause the unit to freeze as it will not detect a music source.
Auto mode:
The unit will play one of the selected auto programs continuously, until you desire to change the
program or user mode.