4
Box contents
Box contents
1x ITA3D 710 laser device
1x user manual
1x IEC to Schuko power cable
1x XLR
– XLR DMX signal cable
Unit and accessory inspection
- Always use the supplied power cable to connect the unit to a power supply. If the cable appears
broken or has visible damage, do not use it. The supplied cable can be replaced with a regular IEC to
Schuko cable, with a minimum cable diameter of 0.75m².
- If the unit will not be used for a longer period of time, disconnect it from the power supply and store it
in a dust-free environment.
- Always check the unit for possible damage before use. If you suspect that something is wrong with
the unit, do not connect it to a power source! When you suspect that your unit is broken or damaged,
contact your local dealer or a certified technician to inspect the unit.
- When your device does not generate any laser beams, do not look directly into the lens. When the
laser suddenly produces a beam, it may cause severe eye damage, possibly resulting in permanent
visual loss.