background image

 

15 

 

DMX and DMX channel settings 

 

The  Ayra ERO 101  LED  movinghead  is designed  for  control  with any DMX-controller  or  DMX-

software,  to control every  function  of  the device  in detail.  For  optimal use  of the  DMX-channels  (which 

can make  a large  difference  with  multiple fixtures)  there  are  several  DMX  working  modes  available, 

from  basic to advanced.   

The  device  is equipped  with 5 DMX  channel  modes: 

- HSV mode:     

 

7-channel  DMX 

- STAGE  mode:   

 

12-channel  DMX 

 

 

 

 

9-channel  DMX 

 

 

 

 

8-channel  DMX 

 

 

 

 

5-channel  DMX 

 

The  HSV mode  stands for  Hue,  Saturation  Value mode.  Hue  is the specific color  tone (red,  orange, 

yellow).  Saturation  is the function  to change  between  the brightness  of  the color  compared  to the color 

depthness.  When  selecting more  brightness,  the color  tone will  be slightly less. When selecting  a 

deeper  color  tone, the brightness  will decrease.  In  addition  to these  values  there  is Value,  which 

controls the  overall  light-intensity. This  function  can be  seen  as a  dimmer  function.   

In  the STAGE  modes, the  color combinations  are  defined  with  seperate  values  for  red, green  and  blue. 

This  way you  are  able to make  over  16  million colour  combinations  with the seperate  dimmers,  by 

changing  the intensity of  the several  colors.  

The  amount  of  channels  in one  of  the STAGE  channel  modes  determines  the amount  of  control  that 

you have  over  the several  functions.  When  your amount  of  free  DMX-channels  is minimal, you are 

able  to select a basic 5-channel  control mode  to save  free  channels.  An advanc ed  12-channel  mode 

can be  selected when  you want  ultimate control  over  all features  of this device,  including  color 

macro’s, shutter/pulse features,  and so on.  

The  functions  and  values  of  the several  DMX  channel  modes and  corresponding  values  are  defined 

on  the next pages.  

 

To  avoid  errors  in  your DMX  signal line, Ayra advises  to use a DMX-terminator  at the end  of  your 

DMX-line.  Also recommended  is the use  of  special DMX-cable  with  a cable  impedance  of 110  Ohms. 

A DMX-terminator  mostly consists of a  single XLR  connector  with a  110  Ohm resistor  placed  between 

pin  2 and  3. 

 

Содержание ERO 101





















Отзывы: