Ayra ALO 030, Руководство пользователя

Страница: 6 / 10

6
LED display mode: d 0
The LED display of the unit can be turned off during use, which makes your light-show more attractive,
especially if the display is visible for your audience. When using the menu-buttons the display will be
lit, but after several seconds inactivity the display will be turned off. When pressing one of the menu
buttons the display will activate itself again. The 0 value means display OFF, the 1 value means
display ON. The DMX indicating dot will not turn off.
DMX control mode:
This fixture can be controlled using a DMX-controller and standard XLR male to XLR female cable.
When doing so, make sure your DMX-controller is capable of controlling your fixture. When in doubt,
contact your local dealer for advice.
Set the correct address on the digital display, you are able to choose a value between 001 and 255.
When a DMX-signal is received, a blinking red dot on the display is active.
This unit has the following DMX-channels and DMX-values:
Channel 1: Horizontal movement (pan)
Channel 2: Vertical movement (tilt)
Channel 3: Colors:
Start value End value Function
0 14 White
15 29 Orange
30 33 Blue
45 59 Green
60 74 Yellow
75 89 Pink
90 104 Light blue
105 119 Light green
120 127 Light yellow
128 255 Rainbow effect slow-fast
Channel 4: Gobos:
Start value End value Function
0 7 Open
8 14 Gobo 1
15 21 Gobo 2
22 28 Gobo 3
29 35 Gobo 4
36 42 Gobo 5
43 49 Gobo 6
50 56 Gobo 7
57 63 Gobo 8
64 70 Gobo Shake Open
71 77 Gobo Shake Gobo 1
78 84 Gobo Shake Gobo 2
85 91 Gobo Shake Gobo 3
92 98 Gobo Shake Gobo 4
99 105 Gobo Shake Gobo 5
106 112 Gobo Shake Gobo 6
113 119 Gobo Shake Gobo 7
120 127 Gobo Shake Gobo 8
128 255 Gobo Wheel rotation effect slow-fast