The operating mode can not be
changed
The device is in Slave mode
If the device is in Slave mode, it
will wait for a master signal unless
there is a DMX signal present. Set
the device to Master to activate the
sound-controlled or automated
operation modes.
Movements are somewhat shaky.
Movements have been
programmed to too slow a pace
Slow-paced programmed
movements may cause the moving
head to move in incremental motor
steps. This can be corrected to a
certain degree by adjusting, per
device, the Pan / Tilt speed in
DMX mode.
Pan and/or tilt are in reverse
Pan or tilt inversion is set
Check pan or tilt inversion settings
and switch them on or off as
required.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials: 07-10-2019 RV
Revision date and author's initials: -
