background image

Safety instructions

Everyone involved with the installation, operation and maintenance of this device must:
- Be qualified
- Be skilled
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the device or the 
included accessories be damaged, please contact your dealer for more information.
- Ensure that the device is in good working condition and is safe to operate. Please follow the advice and 
instructions as they are described in this user manual.

Damage caused by misuse and/or modifications made to the device are not covered by the warranty.
This device does not contain any parts that can be repaired or replaced by the user. Should maintenance or 
repairs be necessary, they must be handled by a qualified technician.
The light source of this device is not replaceable. If the light source no longer functions, the entire device 
needs to be replaced. 

Important information regarding safety and health:

- Do not remove any labels or stickers from this device.
- Do not leave any cables lying around.
- The device should not be opened up, and any hardware or software that may be present should not be 
modified.
- To achieve optimal performance, inputs on this device should not be fed with a signal higher than 
necessary.
- The device should only be used indoors; contact with water, rain and moisture should always be avoided. 
Do not place any objects containing liquid on top of the device.
- Remove the device from any nearby flames or heat sources; do not place it near flammable fluids, gasses 
or objects.
- Disconnect this device from a power source if it will not be used for a longer period of time, if maintenance 

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author's initials:18-02-2017 RV

Revision date and author's initials: -

WARNING!

Keep this device away from moisture, water and rain to avoid the chance of electric shocks.

WARNING!

Only connect this device to a suitable power socket. This device functions on a specific power 
voltage. If it is plugged into a power socket with a different voltage, it could result in permanent 
damage and even dangerous situations such as fire or electric shocks.

WARNING!

Be careful when operating this device. Touching the wires that are connected to the mains, 
inside or outside the device, could result in electric shocks.

Содержание 9000-0031-9683














Отзывы: