![background image](http://html1.mh-extra.com/html/ayra/9000-0021-6275/9000-0021-6275_user-manual_3042272014.webp)
The TDC Diamond Scan is equipped with a fuse for its own components. The power input of the device is
directly linked to the power output of the device.
XLR input and output
The TDC Diamond Scan is equipped with XLR chassis connectors. The DMX input is usually connected with
an XLR cable that has a locking mechanism so it can not be pulled from the chassis too easily. Usually the
locking part has to be pressed and held to unlock the mechanism, after which the connector can be removed
from its socket.
Fans and cooling
The TDC Diamond Scan is a modern product and is equipped with a cooling heat sink for every RGBW LED
module. This type of cooling is called convection cooling and it means that there is no fan needed to cool any
of the internal components. As such, the TDC Diamond Scan is very silent in operation. Please ensure that
the cooling heat sinks of the TDC Diamond Scan are not obstructed in any way, as that may cause the
device to overheat.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 13-05-2015 RV Revision date + author initials: