
1
.
Press the Power Switch on the back to “-” position, the switch light up and the
heater is in standby mode.
2
.
Press the button “ ” on remote control to turn on/off the unit.
OVERHEAT SAFETY DEVICE
This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheating. In this case, unplug the appliance, wait for the
heater to cool and remove all obstacles around the heating element, then switch it
back on as described above. The appliance should now operate normally. Should
the problem persist, please contact Customer Service for assistance.
(Ceiling)
(Wall)
500 mm
350 mm
1800 mm
1.
2.
3.
Requirements of Installation:
Keep 350 mm distance from heater to ceiling.
Keep at least 500 mm distance between heater and
surrounding.
Keep at least 1800 mm height from heater to ground.
Install 2 pieces of AAA, 1.5V batteries (not included) into the remote
control.
OPERATION:
Remote control:
Warning:
Before install the heater, make the support rail enough
durable and firm, and make the hanging chain always
tautly and the supply cord will never be stressed.
Before using the heater, make it’s mounted tightly on the
support rail.
GB
44
|
45
Содержание Texas DS2000
Страница 26: ...GB NOTIZEN I NOTES I NOTA I NOTES 50 51...